01782 349 430

Search for:

Smoke Extraction Belt Driven Fans

Design

Motor :

  • Class F motors with ball bearings, IP55 protection
  • Three-phase 230/400V.-50Hz. (up to 5.5CV.) and 400/690V.-50Hz. (power over 5.5CV.)

Finish:

  • Anticorrosive galvanized sheet steel.

Application

Smoke Extraction & car park Ventilation

etiqueta_ext_vertical-a

CJTX

cjtx_c_jpg_518

Design

400ºC/2h belt-driven extraction units with double-inlet fan

400ºC/2h extraction units with motor and belt-driven inside the plate to work outside fire danger zones.

SPECIFICATION
FANGalvanized sheet steel structure. Impeller with forward-facing blades made from galvanised sheet steel Linear air circulationMOTORSingle -or two-speed depending on the model Max. temperature of air for transport: S1 Service -20ºC+ 120ºC for continuous usage, S2 Service 200ºC/2h, 300ºC/2h and 400ºC/2h
ON REQUESTFans with vertical outletMODELSAvailable from impeller size 7/7 up to 30/28 Air Volumes from 915 up to 49,000m³/h
APPROVALSApproval according to Standard EN-12101-3-2002, F400 : 400°C/2hour : certificate no.: 0370-CPD-0468

CSX

csx_jpg_796

Design

400ºC/2h centrifugal belt-driven fans and extraction units to work outside fire danger zones with backward-curved impeller

400ºC/2h centrifugal belt-driven fans with backward-curved impeller.

SPECIFICATION
FANSteel sheet casing Impeller with backward-curved blades made from sheet steel Approval according to Standard EN-12101-3:2002, certificate no.: 0370-CPD- Protective anti-contact guardMOTORMax. temperature of air for transport: S1 Service -20ºC to + 150ºC for continuous usage, S2 Service 200ºC/2h, 300ºC/2h and 400ºC/2h
ON REQUESTSpecial windings for different voltages Fan designed to transport air up to 250ºC ATEX certification, Category 2 Fans with two-speed motor.MODELSAvailable from diameter 315 up to 1000mm Air Volumes from 3,000 up to 53,000m³/h
APPROVALSF400 : 400°C/2hour : Approval pending

CJSRX

cjsrx_jpg_918

Design

400ºC/2h centrifugal belt-driven fans and extraction units to work outside fire danger zones with backward-curved impeller

400ºC/2h belt-driven extraction units with backward-curved impeller.

Application

Smoke Extraction & car park Ventilation

SPECIFICATION
FANSteel sheet casing Impeller with backward-curved blades made from sheet steel Approval according to Standard EN-12101-3:2002, certificate no.: 0370-CPD- Protective anti-contact guardMOTORMax. temperature of air for transport: S1 Service -20ºC to + 150ºC for continuous usage, S2 Service 200ºC/2h, 300ºC/2h and 400ºC/2h
ON REQUESTSpecial windings for different voltages Fan designed to transport air up to 250ºC ATEX certification, Category 2 Fans with two-speed motor.MODELSAvailable from diameter 315 up to 1000mm Air Volumes from 3,000 up to 53,000m³/h
APPROVALSF400 : 400°C/2hour : Approval pending