01782 349 430

Search for:

Rosenberg EC in-line duct fans

in-line_duct_fan_from_Axair

Rosenberg has launched a new range of EC in-line duct fans in metal casings. Available in the following industry standard spigot sizes 160, 200, 250, 315 and 355 they have a lower consumption compared to traditional AC alternatives. Fitted with all usual EC features, such as tacho output (speed sensor), and easy speed controllability by 0-10VDC signal or PWM.

If you were to compare an EC fan against a similar size AC fan, R315L (AC) vs R315G (EC). The AC version has a power consumption (at free air) of 0.317kwa and the EC 0,194kwa. The AC version is also slightly more powerful (max air 1750m³/h / max pressure 700Pa) than the EC (1500m³/h max / 640Pa Max).


If both fans are operated in a typical commercial application, operating point 900m³/h at 300Pa.

The fan will operate at full speed during 8 hours per day and run at half speed the rest of the time, 50 weeks per year, 7 days per week.

Fan Power full speed900m³/h @ 300Pa Power half speed600m³/h at 135Pa Full speed period Half speed period Total (kwh)
R315L(AC) 0.318kwa 0.174kwa 2800hrs x 0.138kwa = 890.4kwh 5600hrs x 0.174kwa = 974.4kwh 1864.8kwh
R315G(EC) 0.192kwa 0.067kwa 2800hrs x 0.192kwa = 537.6kwh 5600hrs x 0.067kwa = 375.2kwh 912.8kwh

 

The table below shows the cost to operate each fan. You can see that the EC version is more cost effective making a yearly saving of £139.99, that is a 49% saving on the comparative AC version.

Fan Cost per kwh Cost per year
R315L(AC) £0.1439 x 1864.8kwh £268.34
R315G(EC) £0.1439 x 912.80kwh £131.35

(data source from www.energysavingtrust.org.uk providing the standard rate for electricity at 14.39p/kwh)

 

For further information on EC in line duct fans, contact the Axair team today.

 

Tags: ,


Comments are closed.