The NIMUS and NIMAX range are available with 11 impeller sizes, from diameter 310mm to 1400mm and with motor powers from 0.37kW to 110kW, with airflow to 88,000m3/h and pressures to 3350Pa.
The range, as standard, incorporates a reinforced housing protected against corrosion by powder coated resin with air handling temperatures to 130°C. Typical applications include food industry processing, boiler/heating, paint booths plus many other applications and installations. The range is ideally suited to large spaces such as factories or warehouse and is situated at the inlet our outlet of ductwork to provide maximum ventilation.
The range options available on request include ATEX Zone 1 and ATEX Zone 2 (read our guide to ATEX fans here), the fans can also be produced in special finishes such as marine specification, hot dip galvanised or stainless steel in SS304 or SS316. High temperature options are also available with the inclusion of an additional cooling impeller to handle maximum temperatures of 250°C.
Biomass Case Study
Axair have recently supplied two of the larger fans in the NIMUS / NIMAX range with 75kW motors fitted they were also supplied with matching inverters, for installation into a new large Biomass gas site. The fans were required to provide both ventilation and combustion air to the process and site. Accurate and reliable airflow, plus controllability, were key to the efficient running of the site. The Storm NIMUS and NIMAX fans were installed with full confidence and have proved to be the correct product for this application. Read our Biomass, Biofuel & Renewable Energy guide here.
For more information about the range and how it could work for your application, please contact our team on 01782 349 430, email firstname.lastname@example.org or visit the Medium Pressure Backward Curved Centrifugal Fans page.